Accessories

Pressure or Vacuum Tight Applications

Compression Fittings

300 series stainless steel with 1/8" NPT thread for setting immersion and pressure tight entry into vessels, process lines, etc. Useable to 4000 psi differential pressure

Surface or Pipe Measurements

300 series ST/ST clamp that can be welded, brazed, spot welded, or glued to the surface of the item being measured. The wide tabs insure adequate heat flow between the sensor and measured object to keep conduction errors at a minimum.

3-Conductor Lead Wire

Part No. 012529 - 3-Conductor stranded nickel 20 ga. teflon over each with tinned copper braid overall and teflon wrap overall. Color coded, 2 black, 1 red.

Temperature Transmitters (Spring Loaded)

Part No. 47041 (fits T-96.3, T-296.3, T-396.3) - Specify calibration and span


ARiDET® RTD's are available in three diameters.



Elements made with 100 ohm at 0°C and two calibrations.